The structure you cannot see, explained in numbers
The difference in a motorhome begins before the options list: in how loads are distributed, walls are layered, heat is managed and exterior panels are machined.
ZEUS K670 / BODY & CHASSIS ENGINEERINGZEUS K670MUSSO M5 · 4WD
3,510 mmK670 wheelbase
WABCOElectronic air suspension
6 LAYERSSix-layer composite wall
CNCDrawing-based panel machining
ENGINEERING PHILOSOPHY
Beyond saying “better,” we explain how it is made.
YES RV treats driving stability, comfort at rest and durability in repeated use as one design challenge. Vehicle dimensions and axle loads are based on vehicle specification documents; model equipment is based on the official June 2026 price lists.
01 / VEHICLE BALANCE
Balance is measured through axle loads.
We check the actual load on the front and rear axles and how that load is distributed within each axle's design limit.
K670 / WABCO SYSTEMREAL UNDERBODY FOOTAGE
UNDERBODY CAMERA / ACTUAL OPERATIONFrom height adjustment to speed bumps
ELECTRONIC AIR SUSPENSION · ROAD TEST
Comfort you can feel, even under load
The K670 uses electronic air suspension designed around a vehicle carrying an actual camping module. An underbody camera captures ride-height adjustment and suspension movement over speed bumps.
YES RV COMPARATIVE ROAD TEST
“Even with a camping module fitted, our comparative test drive felt more comfortable than the unmodified base vehicle.”
Subjective impressions from YES RV internal comparison drives
Ride comfort may vary with vehicle specifications, load, tire condition, road surface and driving conditions.
K670 DRIVING SYSTEM
WABCO Electronic Air Suspension
The K670 driving system connects an electronic control unit, height sensors, solenoid valves and a compressor to detect ride height and control air pressure.
ECUElectronic control unit
REMOTERemote controller
VALVESolenoid valve
SENSORRide-height sensor
AIRVehicle compressor
LOW-MOUNTED MASS
Heavy equipment mounted low
The K670 positions its 600A lithium iron phosphate battery and 200L stainless-steel fresh-water tank low in the vehicle to avoid concentrating equipment mass high in the body.
LiFePO₄
600A
FRESH WATER
200L
DRIVE
4WD
Based on K670 standard equipment, June 2026
APPROVED SPECIFICATION CASES
Front and rear axle loads, documented
Approved specification examples for the two-seat K670FF and K670FU. Current production vehicles may vary by model year, base vehicle and selected equipment.
2024 approved specifications
ZEUS K670FF
Gross weight 3,380 kg
Front axle · loaded1,375 / 1,400 kg
Remaining capacity to the axle design limit: 25 kg available
Rear axle · loaded2,005 / 2,100 kg
Remaining capacity to the axle design limit: 95 kg available
A wall is more than one panel: it has six distinct roles.
Each layer has a defined role, from resistance to impact and moisture through structural support and insulation to interior surface temperature and finish.
Physical cross-section samplesStandard and YES RV reinforced structures
Conceptual diagram explaining the structure; layer thicknesses are not to scale.
01
GRP panel
Outer skin designed to withstand external impact and moisture
02
PP reinforcement
Additional structural reinforcement that helps reduce heat transfer
03
XPS insulation
Core insulation layer that reduces the effects of outdoor temperatures
04
Aluminum
Structural reinforcement supporting the insulation layer
05
Thermal insulation
Designed to reduce interior surface temperature differences and condensation
06
Interior finish
Final surface finish for the living space
Standard structure example
GRP → XPS → Aluminum → Finish
A basic panel structure with an outer skin, insulation, structural support and an interior finish.
+YES RV reinforced structure
Added PP reinforcement + thermal insulation
Additional manufacturing steps reinforce the structure while considering interior surface temperature differences and condensation reduction.
* This explanation is based on YES RV manufacturing specifications. The reference structure and actual specifications may differ by manufacturer, model and production date.
03 / THERMAL MANAGEMENT
Warmth is more than a heater: it is how heat reaches you.
The hot-water boiler system listed in the June 2026 price list connects floor, bunk and bathroom heating with domestic hot water, supporting winter use throughout the living space.
We verify surface consistency and subsequent assembly quality.
04
Consistent finishing quality
This supports accurate assembly of windows, service doors and other openings.
05 / HUMAN-CENTERED ENGINEERING
Spaces built to last are designed for daily use.
Real-world use informs the design, from furniture materials and machining, finishing and assembly methods to usable shower dimensions and access for loading equipment.
YES RV FURNITURE PROCESSWe make our furniture in-house, from design to assembly
IN-HOUSE FURNITURE ENGINEERING
From precision machining to joint assembly
YES RV precision-machines furniture parts by CNC using design data, then carefully edge-finishes exposed straight and curved surfaces. Interlocking joints improve assembly accuracy and stability, helping reduce looseness and noise caused by road vibration. Standardized machining data also supports future servicing and replacement-part manufacture.
01
Precision CNC Machining
Furniture parts and joint grooves are machined to consistent dimensions based on design data.
02
Straight and Curved Edge Finishing
Equipment precisely finishes exposed edges, from straight sections to rounded curves.
03
Interlocking Joint Assembly
Machined grooves and joints interlock to improve part alignment and connection stability.
MATERIAL PROOFMelamine plywood
The surface and cross-section of the boards we use. We manage production in-house, from material selection through machining, finishing and assembly.
USABLE SPACE1,095 × 815 mm
Spacious Shower Room
Beyond fitting the equipment, we provide measured width and depth for actual movement.
THROUGH STORAGE
Rear Pass-Through Storage
Rear storage access is designed so long equipment and bulky camping gear can be loaded and unloaded from either side.
LOAD THROUGH
APPLICATION BY SERIES
Engineering should be clear about model availability.
Rather than presenting every technology as standard across all models, we distinguish K620 and K670 specifications listed in the June 2026 price lists.
Feature
ZEUS K620
ZEUS K670
Air suspension
Manual air suspension
WABCO Electronic Air Suspension
Axle extension
Not separately listed in the 2026 price list
Listed as standard
Solar · MPPT
400W · 40A
800W · 60A
Fresh water · Waste water
170L · 170L
200L · 180L
Thermal insulation
Optional during manufacture
Listed as standard for the bunk and entire interior
Heating zones
Floor · Bunk · Hot water · Heater
Floor · Bunk · Bathroom · Hot water
Exact coverage may vary by layout, selected options and production date.
06 / VERIFICATION
Engineering is built into the process and backed by records.
Research, production and after-sales service are connected within one company, with quality and environmental systems managed under formal certification frameworks.
R&D
In-house R&D Center
Established and recognized in 2022
ISO 9001
Quality Management System
ISO 9001:2015 certified
ISO 14001
Environmental Management System
ISO 14001:2015 certified
INNO-BIZ
Technology-Innovative SME
Certified in 2023
REFERENCE DOCUMENTS
Vehicle specifications and axle loads are based on the K670FF (2024) and K670FU (2025) specification documents under Form 25 of the Enforcement Rule of Korea's Motor Vehicle Management Act. Standard and optional equipment refer to the official June 2026 K620 and K670 price lists. Specifications and equipment may change with product improvements, base vehicle, model year, seating capacity and selected options.
ENGINEERING CONSULTATION
Start with the structure, then discuss the options
Tell us how you travel, what you carry, and your seasons and destinations. We will explain the design differences between models.